Brocade Communications Systems RFS6000 - Manual (Page 747)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 745
53-1001931-01
RFID config commands
23
no
RFID config commands
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
no [activate|reader|service]
Parameters
Usage Guidelines
Use
[no]
command to undo the configurations on the parameters mentioned in the table. Refer to
the parameters, within this chapter, for complete syntax.
Example
RFController(config-rtls-rfid)#no activate
RFController(config-rtls-rfid)#
activate Deactivates/disables RTLS adapter
reader Disables RFID reader configuration commands
service Disables service commands