Brocade Communications Systems RFS6000 - Manual (Page 772)

770 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
auto-assign
smart-rf config commands
Enables individual RF parameters to be auto-assigned
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
auto-assign [all|channel|detector|power|rescuer] enable
Parameters
Example
RFSController(config-wireless-smart-rf)#auto-assign all enable
RFSController(config-wireless-smart-rf)#auto-assign channel enable
RFSController(config-wireless-smart-rf)#auto-assign detector enable
RFSController(config-wireless-smart-rf)#auto-assign power enable
RFSController(config-wireless-smart-rf)#auto-assign rescuer enable
auto-assign
[all|channel|detector|powe
r|
rescuer] enable Enables individual RF parameters to be auto-assigned.
•
all - Enables auto-assign for all the RF parameters
•
channel enable - Enables auto-assign for channels
•
detector enable - Enables auto-assign for detectors
•
power enable - Enables auto-assign for power
•
rescuer enable - Enables auto-assign for rescuer