Retry-threshold – Brocade Communications Systems RFS6000 User Manual
Page 788
Advertising
786
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
retry-threshold
Sets the threshold for the average number of retries performed before a radio re-runs a channel
scan
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
retry-threshold
<0.0-15.0>
Parameters
Example
RFController(config-wireless-smart-rf)#retry-threshold 8.4
RFController(config-wireless-smart-rf)#
<0.0-15.0>
The value in decimal number. This is the average number of
retries a radio makes before it re-runs the channel scan.
Advertising