Brocade Communications Systems RFS6000 - Manual (Page 417)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 415
53-1001931-01
Interface config commands
12
mac
Interface config commands
Applies a MAC access list (ACL) to Gigabit Ethernet interface
NOTE
The access list cannot be applied on a management interface (me1).
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
mac access-group <acl-name> in
Parameters
Example
RFController(config-if)#mac access-group Ark200 in
RFController(config-if)#
access-group <acl-name> Sets the MAC access groups ACL
•
<acl-name> – Sets ACL name
•
in – Applies the ACL to ingress packets