Brocade Communications Systems RFS6000 - Manual (Page 545)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 543
53-1001931-01
Chapter
18
DHCP Class Instance
In this chapter
• DHCP Server Class config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
Use the (config-dhcpclass) instance to configure DHCP user classes. The controller supports a
maximum of 8 user classes per DHCP class. To navigate to this instance use the command:
RFController(config)#ip dhcp class <class-name>
RFController(config-dhcpclass)#
Refer to ip on page 412 and DHCP Config commands on page 507 for other DHCP related
configurations.
DHCP Server Class config commands
Table 19 summarizes
config-std-nacl
commands:
TABLE 19 DHCP Server Class Config Commands
Command Description Ref.
clrscr Clears the display screen page 544
end Ends the current mode and moves to the EXEC mode page 545
exit Ends the current mode and moves to the previous mode page 546
help Displays the interactive help system in HTML format page 547
multiple-user-class Enables multiple user class options page 548
no Negates a command or sets its defaults page 549
option Defines DHCP Server options page 550
service Invokes service commands to troubleshoot or debug
(config-if) instance configurations
page 551
show Displays running system information page 552