Brocade Communications Systems RFS6000 - Manual (Page 58)

56 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Common commands
2
Parameters (GLOBAL Config)
Usage Guidelines
The
service password-encryption
set by the user cannot be disabled without knowing the old
password. Refer the note below for more clarification.
advanced-vty Enables advanced mode vty interface
dhcp Enables the DHCP server
diag[enable|limit|period|
tech-support-period|
tech-support-url]
Displays diagnostics
•
enable – Enables in-service diagnostics
•
limit – Diagnostic limit command
•
period – Sets the diagnostics period
•
tech-support-period – Sets diagnostics
tech-support-period
•
tech-support-url – Sets the URL to use during auto generated
technical support dumps
password-encryption
[secret|2|<pass-phrase>
|<encryption-key>] Encrypts passwords
•
secret – Encrypts passwords/keys with a secret phrase
•
2 – Type of encryption SHA256-AES256
•
<pass-phrase> – Passphrase for encryption
•
<encryption-key> – Plaintext password or key to encrypt
pm sys-restart Process Monitor
•
sys-restart – Enables the PM to restart the system when a
processes fails
prompt crash-info Enable crash-info prompt
•
crash-info – Enables a crash-info prompt
radius restart Enable radius server
•
restart – Restarts the radius server with an updated
configuration
redundancy
dynamic-ap-load-balance
start Configure redundancy group parameters
•
dynamic-ap-load-balance start – Enables the Dynamic AP
Load Balance feature
•
start – Start dynamic AP load balance
set [command-history
|reboot-history|
upgrade-history] Set service parameters.
•
command-history <10-300> – Sets the size of the command
history (default is 200)
•
reboot-history <10-100> – Sets the size of the reboot history
(default is 50)
•
upgrade-history <10-100> – Sets the size of the upgrade
history (default is 50)
show Shows running system information
•
cli – Shows the CLI tree of the current mode
terminal-length <0-512> System wide terminal length configuration
•
<0-512> – Number of lines of VTY (0 means no line control)
watchdog Enables the watchdog