Brocade Communications Systems RFS6000 - Manual (Page 389)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 387
53-1001931-01
Chapter
11
Crypto-trustpoint Instance
In this chapter
• Trustpoint (PKI) config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
The (config-crypto-trustpoint) commands define a Certificate Authority (CA) trustpoint. This
is a separate instance, but belongs to the
crypto pki trustpoint
mode under the
config
instance.
To navigate to this instance, use the command
RFController(config)#crypto pki trustpoint <trustpoint-name>
RFController(config-trustpoint)#
Trustpoint (PKI) config commands
Table 11 summarizes
config-crypto-trustpoint
commands:
TABLE 11 Trustpoint (PKI) Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 388
company-name Defines a company name for the trustpoint page 389
email Sets an e-mail ID for the trustpoint page 390
end Ends the current mode and moves to the EXEC mode page 391
exit Ends the current mode and moves to the previous mode page 392
fqdn Sets the domain name of the trustpoint page 393
help Displays the interactive help system page 394
ip-address Sets an IP address for the trustpoint page 395
no Negates a command or sets its defaults page 396
password Sets the challenge password (applicable only for requests),
to access the trustpoint page 397
rsakeypair Defines a RSA Keypair to associate with the trustpoint page 398
service Invokes service commands to troubleshoot or debug the
crypto pki trustpoint instance configuration
page 399
show Displays running system information page 400
subject-name The subject name is a collection of required parameters to
configure a trustpoint page 402