Brocade Communications Systems RFS6000 - Manual (Page 831)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 829
53-1001931-01
AAP IP Filter config commands
27
permit
AAP IP Filter config commands
Specifies packets to permit
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
permit [all|icmp|tcp|upd|protocol]
permit [all|icmp|tcp|udp] [any|src-start-ip <IP> src-end-ip <IP>]
[any|dst-start-ip <IP> dst-end-ip <IP>]
[all|dst-start-port <1-65535> dst-end-port <1-65535>] rule <1-20>
permit protocol <1-254> [any|src-start-ip <IP> src-end-ip <IP>]
[any|dst-start-ip <IP> dst-end-ip <IP>]
[all|dst-start-port <1-65535> dst-end-port <1-65535>] rule <1-20>