Brocade Communications Systems RFS6000 - Manual (Page 149)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 147
53-1001931-01
show
2
virtual-IP
Global Config Mode
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show virtual-ip [config|status]
Parameters
Example
RFController>show virtual-ip status
VIP State : VIP_ST_INIT
VIP Status : Disabled
Cluster Redundancy Status : Disabled
Advertisement Length : 0
Total Advertisements Sent : 0
Total Number of Peers : 0
Total Learning Advts Sent : 0
Total Advertisements Recvd : 0
Reserved VMAC Address Range : 00-15-70-88-8A-90 to 00-15-70-88-8B-8F
Used VMAC Address Range : 00-15-70-88-8A-90 to 00-15-70-88-8A-90
Available VMAC Address Count : 256
Used VMAC Address Count : 0
DHCP Server status : Not Running on this Controller
============================================================
Vlan | Priority | controllerID | State | Advt sent | Advt recvd
RFController>
RFController>show virtual-ip config
RFS7K-1(config)#show virtual-ip config
Virtual-IP Status : Enabled
Cluster Redundancy Status : Enabled
Priority Selection Mode : Automatic
Learning Timeout(sec) : 2
Advertisement Timeout(sec) : 1
Gratuitous ARP Timeout(sec) : 180
Virtual-IP Server Port : 51525
Controller IP : 192.168.11.4
Reserved VMAC Address Range : 00-15-70-88-8A-90 to 00-15-70-88-8B-8F
Configured Virtual MAC : 00-15-70-88-8A-98
DHCP Server status : Active
+---------------------------------------------------+
| Vlan | Priority | ControllerIP | Virtual IP |
----------------------------------------------------+
| 11 | 3232238340 |192.168.11.4 |192.168.11.10 |
+---------------------------------------------------
show virtual-ip
[config|status] Displays all the virtual-ip’s present in the configuration.
config – Displays the configuration details.
status – Displays current status of the controller.