Brocade Communications Systems RFS6000 - Manual (Page 267)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 265
53-1001931-01
Global Configuration commands
5
mac
Global Configuration commands
Configures MAC access lists (goes to the MAC ACL mode)
For more information on this mode, see Chapter 16, Extended MAC ACL Instance .
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
mac access-list extended <mac-acl-name>
Parameters
Usage Guidelines
To delete Standard/Extended and MAC ACL, use
no access-list <access-list name>
under
the Global Config mode.
Example
RFController(config)#mac access-list extended Test1
RFController(config-ext-macl)#
NOTE
When using the
ip access-list
parameter, enter the following contexts: ext-macl — extended
MAC ACL. For more details see .Extended MAC ACL Instance on page 487
access-list extended
<mac-acl-name> Defines the ACL configuration for the MAC address
•
extended <mac-acl-name>– MAC Extended ACL
•
<mac-acl-name> – Defines the name of the ACL