Brocade Communications Systems RFS6000 - Manual (Page 821)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 819
53-1001931-01
Chapter
27
AAP IP Filtering
In this chapter
• AAP IP Filter config commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819
The AAP IP Filter list mechanism (config-aap-ipfilter) creates filters based on the request received
from the controller. It then applies those filters to the specified WLAN/LAN. To navigate to this
instance, use the command:
RFController(config)#aap-ipfilter-list <filtername>
RFController(config-aap-ipfilter)#
AAP IP Filter config commands
Table 29 summarizes the controller
config-aap-ipfilter
commands
TABLE 29 AAP IP Filter Configuration Commands
Command Description Ref.
clear-all-rules Clears all the configured rules page 820
clrscr Clears the display screen page 821
deny Specifies the packet to reject page 822
end Ends the current mode page 825
exit Ends the current mode and moves to the previous mode page 826
help Displays the interactive help system page 827
no Negates a command or sets its defaults page 828
permit Specifies packets to forward page 829
service Invokes the service commands to troubleshoot or debug
instance configurations page 832
show Displays running system information page 834