Brocade Communications Systems RFS6000 - Manual (Page 708)

706 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
RTLS config commands
21
aeroscout
RTLS config commands
Configure support for Aeroscout RTLS engine.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
aeroscout [enable|multicast-listen-addr<MAC-Address>]
Parameters
Usage Guidelines
Use
[no] aeroscout (enable)
to disable support for Aeroscout RTLS engine. This does not affect
on-board locationing.
Example
RFController(config-rtls)#aeroscout enable
RFController(config-rtls)#
enable Enables and configures external Aeroscout RTLS engine
multicast-listen-addr
<MAC-Address> Configures multicast MAC address to which Aeroscout tags
packets are destined
•
<MAC-Address> – Multicast MAC address. AeroScout’s
default multicast MAC address is ‘01:0C:CC:00:00:00’.