Brocade Communications Systems RFS6000 - Manual (Page 568)

566 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Radius configuration commands
19
no
group
Use this command to negate a command or set its defaults
Syntax
no [policy|rad-user|rate-limit]
no policy [day|time|vlan|wlan]
no policy wlan [<1-256>|all] <1-256>
no rate-limit [wired-to-wireless|wireless-to-wired]
Parameters
Example
RFController(config-radsrv-group)#no policy day
RFController(config-radsrv-group)#
RFController(config-radsrv-group)#no policy time
RFController(config-radsrv-group)#
RFController(config-radsrv-group)#no policy vlan
RFController(config-radsrv-group)#
RFController(config-radsrv-group)#no policy wlan 2 5
RFController(config-radsrv-group)#
RFController(config-radsrv-group)#no rad-user all
RFController(config-radsrv-group)#
RFController(config-radsrv-group)#no service radius
%%Info: Radius service stopped...
RFController(config-radsrv-group)#
policy
group
policy [day|time|vlan|
wlan] Defines the RADIUS group access policy configuration
•
day – Resets the access policy (days of permitted access) for
this group
•
time – Configures the group’s hourly access permissions
•
vlan – Sets the VLAN ID for the group
•
wlan [<1-256>|all] – Configures WLAN access policy for this
group
•
<1-256> – Sets the WLAN range for the access policy
•
all – Removes all the WLAN allowed
rad-user [<name>|all] Removes a user from this group
•
<name> – Defines an existing user name in this group
•
all – Removes all users from this group
rate-limit
[wired-to-wireless|
wireless-to-wired] Negate a command or set its defaults
•
wired-to-wireless –uplink direction - from wireless client to
network
•
wireless-to-wired – down-link-direction - from network to
wireless client