Password – Brocade Communications Systems RFS6000 User Manual
Page 399
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
397
53-1001931-01
Trustpoint (PKI) config commands
11
password
Trustpoint (PKI) config commands
Sets the challenge password (applicable only for requests) to access the trustpoint
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
password [0<password>|2<password>|<password>]
Parameters
Example
RFController(config-trustpoint)#password 0 TestPassword
RFController(config-trustpoint)#
0 <password>
Password <password> is specified as unencrypted, the password
should be between 4 to 20 characters
2 <password>
Password <password> is encrypted with password-encryption
secret, the string length of encrypted password should be
between 44 - 64 characters
<password>
Sets the password to <password> (4 to 20 characters)