Brocade Communications Systems RFS6000 - Manual (Page 732)

730 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
ESPI config commands
22
adapter
ESPI config commands
Enables/disables a specified adapter or all adapters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
adapter ale-tcp [enable|port <3000-3100>]
Parameters
Usage Guidelines
Use
{no} adapter <adapter> enable
to disable the specified adapter
NOTE
ALE-TCP is the only adapter shipped along with the controller.
Example
RFController(config-rtls-espi)#adapter ale-tcp port 3040
RFController(config-rtls-espi)#
adapter ale-tcp [enable|port
<3000-3100>] Application side protocol implemented by adapter.
•
ale-tcp – ALE over TCP Adapter
•
enable – Activates/enables ESPI adapter
•
port <3000-3100> – Configures ESPI adapter listening
port