Brocade Communications Systems RFS6000 - Manual (Page 437)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 435
53-1001931-01
Chapter
13
Spanning tree-mst Instance
In this chapter
• mst config commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
Use the
(config-mst)
instance to configure the controllers Multi Spanning Tree Protocol (MSTP)
configuration. To switch to this instance, use the command:
RFController(config)#spanning-tree mst configuration
RFController(config-mst)#
mst config commands
Table summarizes the
(config-mst)
commands:
TABLE 13 MSTI Configuration Commands
Command Description Ref.
clrscr Clears the display screen page 436
end Ends the current mode and moves to the EXEC mode page 437
exit Ends the current mode and moves to the previous mode page 438
help Displays the system’s interactive help system page 439
instance Assigns a VLAN to the bridge instance page 440
name Sets a name for the MST region page 441
no Negates a command or sets defaults page 442
revision Configures the revision number of the MST bridge page 443
service Invokes service commands needed to troubleshoot or debug
(config-if) instance configurations
page 444
show Shows running system information page 446