Brocade Communications Systems RFS6000 - Manual (Page 532)

530 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
DHCP Config commands
17
next-server
DHCP Config commands
Sets the IP address of the next server in the boot process
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
next-server <IP>
Parameters
Example
RFController(config-dhcp)#next-server 2.2.2.22
RFController(config-dhcp)#
next-server <IP> Sets the next server in boot process
•
<IP> – Defines the server's IP address