Tweco 400 Ultra-Cut(March 2013) - Manual (Page 39)

Manual No. 0-5163 3-13 INSTALLATION
ULTRA-CUT 400
3.09 Connect Cables for CNC, Remote Arc Starter, DMC-3000 and HE 400
1. Connect one end of each cable to the power supply.
2. Connect the other end of the CNC cable to the CNC device .
3. The CNC cable shield must be attached to ground.
RETURN SUPPLY
Art # A-09454
RETURN SUPPLY
J15 To CNC Control
J59 To Remote
Arc Starter
J55 To DMC-3000
Customer Wiring
Access Hole
J70 To Heat
Exchanger