Ultra-cut 400 – Tweco 400 Ultra-Cut(March 2013) User Manual
Page 82
OPERATION
4-6
Manual No. 0-5163
ULTRA-CUT 400
4.07 TSC-3000 Creating a Custom Process
Considerable effort has been made to define the best parameters for each cutting and marking process. However
for various reasons, variations in material composition, variations in cutting table performance, user preferences,
etc. you may desire to modify one or more processes. Or perhaps you want to keep the same cutting current
and gas pressures but save different THC / CNC parameters such as cutting speed, arc voltage, pierce height,
etc. That will still be treated as a custom process.
Creating a Custom Process starts with an existing standard process. From there you may adjust the cutting
current and the gas pressures. It’s up to you to determine and enter the correct values. There no limits in these
values, if you change too far it may cause faults.
You may also change the values displayed on THC/CNC Settings screen. THC / CNC settings on the TSC-3000
at this time are for information only. They do not connect to the THC or CNC so do not automatically modify
setting in those devices. Still, when you determine the correct values for your modified (custom) process you
may want to record them here.
The custom process will have the same name as the standard base process but it will be automatically assigned
a new number and the whole name and number will be in red text wherever it appears.
You cannot change the gas type. If you want a different gas types find a standard process that uses those types
and edit it.
First step
is to select a standard process. Usually you want a process that is for the same metal type and thick-
ness that you want to cut. From the HOME screen you may select a recent process (sect 4.06, Selecting Recently
Used Process) or a new process (sect 4.05, Selecting New Process).