Ultra-cut 400 – Tweco 400 Ultra-Cut(March 2013) User Manual
Page 68
Advertising
INSTALLATION
3-42
Manual No. 0-5163
ULTRA-CUT 400
Art # A-09631
Control Cable from Power Supply rear panel
Output Connections
1. Refer to the illustrations. Make the following output connections to the Arc Starter.
NOTE
For newer leads with only one black wire, it must be connected to the pilot return. There are no inner shield wires.
Pilot Lead
Connection Detail
Pilot Lead
Art # A-09632
Pilot Return Cable (from Torch Leads)
Advertising