Ultra-cut 400 – Tweco 400 Ultra-Cut(March 2013) User Manual
Page 52
Advertising
INSTALLATION
3-26
Manual No. 0-5163
ULTRA-CUT 400
Preparation
1. Remove the screws securing the Cover Panel to the Module.
Loosen or remove 2 screws
Remove 2 Screws
Art # A-09139_AB
Cover Removal
2. Carefully remove the cover from the module noting the attached wire harness that connects to J1. Remove
the wire harness and then set the cover to the side.
Art # A-09140
Advertising