Tweco 400 Ultra-Cut(March 2013) - Manual (Page 57)

Manual No. 0-5163 3-31 INSTALLATION
ULTRA-CUT 400
3. Attach all hoses and cables to the back of the DPC-3000 except the Fiber Optic cable which will be covered a
little later. Avoid turning any fittings already mounted in the unit by placing a wrench on it before tighten-
ing the hose fitting to it.
Do not connect Fiber Optic cable until later
Art # A-09146
4. Connect hoses from the front of the DMC-3000 where shown below to the torch.
NOTE
One fitting with the notches is left hand thread and the other is standard right hand thread.
Art # A-09147