About your system, Accessing system features during startup – Dell PowerEdge R910 User Manual
Page 11
About Your System
11
1
About Your System
Accessing System Features During Startup
The following keystrokes provide access to system features during startup.
Keystroke
Description
<F2>
Enters the System Setup program. See "Using the System Setup
Program and UEFI Boot Manager" on page 63.
<F10>
Enters System Services, which opens the Lifecycle Controller. The
Lifecycle Controller allows you to access utilities such as embedded
system diagnostics. For more information, see the Lifecycle Controller
documentation.
<F11>
Enters the BIOS Boot Manager or the UEFI Boot Manager,
depending on the system's boot configuration. See "Using the System
Setup Program and UEFI Boot Manager" on page 63.
<F12>
Starts PXE boot.
<Ctrl><E> Enters the iDRAC Configuration Utility, which allows access to the
System Event Log (SEL) and configuration of remote access to the
system. For more information, see the iDRAC user documentation.
<Ctrl><C> Enters the SAS Configuration Utility. For more information, see the
SAS adapter documentation.
<Ctrl><R> Enters the PERC configuration utility. For more information, see the
PERC card documentation
<Ctrl><S> Enters the utility to configure NIC settings for PXE boot. For more
information, see the documentation for your integrated NIC.
book.book Page 11 Tuesday, December 4, 2012 3:11 PM