5 close the handle to lock the drive in place, Removing a hard drive from a hard-drive carrier – Dell PowerEdge R910 User Manual
Page 111
Advertising
Installing System Components
111
5 Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-13.
Figure 3-13. Removing or Installing a Hot-Swap Hard Drive Into a Drive Carrier
1
screws (4)
2
drive carrier
3
SAS/SATA screw hole
4
hard drive
2
4
1
3
book.book Page 111 Tuesday, December 4, 2012 3:11 PM
Advertising