Dell PowerEdge R910 - Manual (Page 20)

20 About Your System
2 VFlash media slot
(optional)
Connects an external SD memory card
for the optional iDRAC6 Enterprise
card.
3 USB connectors (2) Connect USB devices to the system. The
ports are USB 2.0-compliant.
4 iDRAC6 Enterprise
port (optional)
Dedicated management port for the
optional iDRAC6 Enterprise card.
5 PCIe expansion card
slots (7)
PCI Express Generation 1 and
Generation 2
Slot 1: PCIe x4 Gen2 half-length, full
height
Slot 2–4: PCIe x8 Gen2 half-length, full
height
Slot 5: PCIe x4 Gen1 half-length, full
height
Slot 6: PCIe x8 Gen2 half-length, full
height
Slot 7: PCIe x16 Gen2 half-length, half
height
NOTE: Slot 7 can be expanded to four
additional PCIe x4 Gen2 low profile slots
using an optional PCIe expansion riser.
6 Power supplies (4) 1100 W or 750 W
7 System identification
connector
Connects the optional system status
indicator assembly through the optional
cable management arm.
8 System identification
button
The identification buttons on the front
and back panels can be used to locate a
particular system within a rack. When
one of these buttons is pushed, the LCD
panel on the front and the blue system
status indicator on the back blink until
one of the buttons is pushed again.
Item Indicator, Button, or
Connector Icon Description
book.book Page 20 Tuesday, December 4, 2012 3:11 PM