Dell PowerEdge R910 User Manual
Page 39
About Your System
39
E2112
Memory spared
on Card x
DIMM ##.
Power cycle
AC.
The system BIOS spared the
memory because it has
determined the memory has
too many errors.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E2113
Mem mirror
OFF on DIMM
## & ##.
Power cycle
AC.
The system BIOS disabled
memory mirroring because
it has determined one half
of the mirror has had too
many errors. "## & ##"
represents the memory
module pair implicated by
the BIOS.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
I1910
Intrusion
detected.
Check chassis
cover.
System cover has been
removed.
Information only.
I1911
LCD Log Full.
Check SEL to
review all
Errors.
LCD overflow message. A
maximum of ten error
messages can display
sequentially on the LCD.
The eleventh message
instructs the user to check
the SEL for details on the
events.
Check the SEL for details
on the events.
Remove AC power to the
system for 10 seconds or
clear the SEL.
I1912
SEL full.
Review &
clear log.
The SEL is full of events
and is unable to log any
more.
Check the SEL for more
information and then
clear the SEL.
W1100
CPU VCORE
Regulator
temp
exceeding
range. Check
fans.
The regulator temperature
has reached a point outside
of the allowed range.
the problem persists, see
Code
Text
Causes
Corrective Actions
book.book Page 39 Tuesday, December 4, 2012 3:11 PM