Dell PowerEdge R910 - Manual (Page 27)

About Your System 27
E1233 IO Riser
power
failure.
Reseat IO
Riser.
IO riser voltage regulator
failed.
Reseat the I/O riser.
If the problem persists,
see "Getting Help" on
page 203.
E1234 Memory Riser
# power
failure.
Reseat riser
and DIMMs.
Memory riser voltage
regulator failed.
Reseat the memory riser.
If the problem persists,
see "Getting Help" on
page 203.
E1243 CPU # VCORE
Regulator
failure.
Contact
Support.
Processor voltage regulator
failed.
Reseat the processor. See
"Troubleshooting the
Processors" on page 190.
If the problem persists,
see "Getting Help" on
page 203.
E1244 Embedded 10Gb
NICs
disabled.
Check or add
PSUs.
Insufficient standby power
for 10 Gb embedded NICs.
Reseat the power supplies.
See "Troubleshooting
Power Supplies" on
page 179.
If the problem persists,
see "Getting Help" on
page 203.
E1245 CPU # VIO
Regulator
failure.
Contact
support.
Processor voltage regulator
failed.
Reseat the processor. See
"Troubleshooting the
Processors" on page 190.
If the problem persists,
see "Getting Help" on
page 203.
E1310 Fan ## RPM
exceeding
range. Check
fan.
RPM of specified fan is
outside of the intended
operating range.
See "Troubleshooting
System Cooling
Problems" on page 180.
Code Text Causes Corrective Actions
book.book Page 27 Tuesday, December 4, 2012 3:11 PM