Dell PowerEdge R910 - Manual (Page 99)

Installing System Components 99
Removing a Memory-Riser Blank
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 89.
3 Press the release tabs toward each other and lift the memory-riser blank
out of the system.
Figure 3-6. Removing and Installing a Memory-Riser Blank
1 release tabs (2) 2 memory-riser blank
1
2
book.book Page 99 Tuesday, December 4, 2012 3:11 PM