Dell PowerEdge R910 - Manual (Page 161)

Installing System Components 161
6 Remove the cooling fan assembly. See "Removing the Cooling Fan
Assembly" on page 117.
7 Slide the board upwards and pull the board toward the front of the system
until the tabs on the board are free from the securing slots on the chassis.
See Figure 3-34.
Figure 3-34. Power Distribution Board
1 power distribution board connector 2 power distribution board
3 tabs (2) 4 securing slots (2)
3
4
2
1
book.book Page 161 Tuesday, December 4, 2012 3:11 PM