Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 145)

-145-
Usage Guide:
To configure DSCP egress remarking of QoS for specific interface
Example:
To configure DSCP egress remarking (Remap) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dscp-remark remap
4.2.65.94 qos dscp-translate
Command:
qos dscp-translate
qos
Quality of Service
dscp-translate
DSCP ingress translation
Default:
Disabled
Usage Guide:
To configure DSCP ingress translation of QoS for specific interface
Example:
To configure DSCP ingress translation of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dscp-translate
4.2.65.95 qos map cos-tag
Command:
qos map cos-tag cos <Cos : 0~7> dpl <Dpl : 0~1> pcp <Pcp : 0-7> dei <Dei : 0-1>
qos
Quality of Service
map
QoS Map/Table configuration
cos-tag
Map for cos to tag configuration
cos
Specify class of service
<Cos : 0~7>
Specific class of service or range