Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 399)

-399-
4.21.73 show platform phy failover
Command:
show platform phy failover
show
Show running system information
platform
Platform specific information
phy
PHYs' information
failover
Failover status
Default:
N/A
Usage Guide:
To display the PHY failover status.
Example:
To display the PHY failover status.
Switch # show platform phy failover
Port Active Channel Broadcast After reset
---- ------ ------- --------- ------- -----
4.21.74 show platform phy id
Command:
show platform phy id [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
platform
Platform specific information
phy
PHYs' information
id
id
interface
Search by port
Default:
N/A
Usage Guide:
To display the PHY ID.
Example:
To display the PHY ID for GigabitEthernet 1/1.