Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 89)

-89-
disable
Disable policer
ebs
Setup EBS for MEF policer
<Ebs : 0-100000>
Excess Burst Size [bytes]
eir
Setup EIR for MEF policer
<Eir : 0-10000000>
Excess Information Rate [kbps]
enable
Enable policer
mode
Setup policer mode
aware
Col or-aware mode
blind
Col or-blind mode
coupled
Cou pling mode
rate-type
Setup rate type
data D ata rate policing
line Line rate policing
type
Setup policer type
mef
MEF ingress bandwidth profile
single
Single bucket policer
Default:
N/A
Usage Guide:
To configure a profile for EVC Policer (Ingress Bandwidth Profile) .
Example:
To configure EVC Policer (Ingress Bandwidth Profile) as tabled below.
Switch# configure terminal
Switch (config)# evc policer 1 enable cbs 20 cir 30 ebs 40 eir 50 mode aware rate-type
data type mef
4.2.55 evc policer update
Command:
evc policer update <PolicerId : 1-2048> [enable | disable] cbs <Cbs : 0-100000> cir
<Cir : 0-10000000> ebs <Ebs : 0-100000> eir <Eir : 0-10000000> mode [aware | blind |
coupled] rate-type [data | line] type [mef | single]
<PolicerId : 1-2048>
Policer ID
cbs
Setup CBS
<Cbs : 0-100000>
Committed Burst Size [bytes]