Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 91)

-91-
<Ivid : vlan_id>
Internal VLAN ID
interface
Setup NNI
learning
Setup learning
policer
Policer (ingress bandwidth profile)
<PolicerId : 1-2048>
Policer ID
<vlan_list>
List of VLANs
discard
Map to policer discarding all frames
none
Map to policer allowing all frames
Default:
0
Usage Guide:
To update an ID for Ethernet Virtual Circuits (EVC).
Example:
To update Ethernet Virtual Circuits (EVC identifier: 1, EVC VLAN ID: 10).
Switch# configure terminal
Switch (config)# evc update 1 vid 10
4.2.57 exit
Command:
exit
Default:
N/A
Usage Guide:
To exit configure terminal mode.
Example:
To exit configure terminal mode.
Switch# configure terminal
Switch (config)# exit
#