Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 200)

-200-
Switch# configure terminal
Switch (config)# ip dhcp pool Nsswitch
Switch (config-dhcp-pool)# netbios-node-type b-node
4.2.73.16 netbios-scope
Command:
netbios-scope <LINE>
netbios-scope
NetBIOS scope
<LINE>
Netbios scope identifier, in 128 characters
Default:
None
Usage Guide:
To configure NetBIOS scope of DHCP Server.
Example:
To configure NetBIOS scope (Interlogix) of DHCP Server for pool “Nsswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool Nsswitch
Switch (config-dhcp-pool)# netbios-scope Interlogix
4.2.73.17 network
Command:
network <IP: A.B.C.D> <Subnet: A.B.C.D>
network
Network number and mask
<IP: A.B.C.D>
Net work number
<Subnet: A.B.C.D>
Network mask in dotted-decimal notation, excluding 255.255.255.255
Default:
None
Usage Guide:
To configure Network IP address of DHCP Server.
Example:
To configure Network IP address (192.168.1.11/24) of DHCP Server for pool “Nsswitch”.