Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 248)

-248-
Switch# configure terminal
Switch (config)# mep 1 dm syncronized
4.2.133 mep <Instance> down
Command:
mep <Instance> [ mip ]
down domain { port | evc | vlan } [ vid <vid> ] flow <flow>
level <level> interface <port_type> <port>
mep Maintenance Entity Point
mip
This MEP instance is a half-MIP
<Instance>
The MEP instance number.
down
This MEP is a Down-MEP
domain
The domain of the MEP
evc
This MEP is a EVC domain MEP.
port
This MEP is a Port domain MEP.
vlan
This MEP is a VLAN domain MEP.
flow
The flow instance that the MEP is related to.
<flow >
The flow instance number when not in the port domain.
vid
In case the MEP is a port Up-MEP or a EVC customer MIP the VID must be given.
<Vid : vlan_id>
The port Domain MEP VID. This is required for a Port Up-MEP.
Default:
None
Usage Guide:
To configure Down-MEP of MEP.
Example:
To configure Down-MEP of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 down domain port flow 1 level 0 interface GigabitEthernet 1/1