Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 385)

-385-
4.21.55 show ipv6 mld snooping mrouter
Command:
show ip igmp snooping mrouter [ detail ]
show
Show running system information
ipv6
IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
mrouter
Multicast router port status in MLD
detail
Detail running information/statistics of MLD snooping
Default:
N/A
Usage Guide:
To display the MLD Router Port information.
Example:
To display the MLD Router Port information.
Switch # show ipv6 mld snooping mrouter
MLD Snooping is enabled to start snooping MLD control plane.
Switch-1 MLD Router Port Status
Gi 1/1: Static and Dynamic Router Port
4.21.56 show ipv6 neighbor
Command:
show ipv6 neighbor [ interface vlan <vlan_list> ]
show
Show running system information
ipv6
IPv6 configuration commands
neighbor
IPv6 neighbors
interface
Select an interface to configure
vlan
VLAN of IPv6 interface
Default:
N/A
Usage Guide:
To display the IPv6 neighbor information.