Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 221)

-221-
4.2.100 ipv6 mld unknown-flooding
Command:
ipv6 mld unknown-flooding
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
unknown-flooding
Flooding unregistered IPv6 multicast traffic
Default:
Enabled
Usage Guide:
To flood unregistered IPv6 multicast traffic.
Example:
To flood unregistered IPv6 multicast traffic.
Switch# configure terminal
Switch (config)# ipv6 mld unknown-flooding
4.2.101 ipv6 route
Command:
Ipv6 route <X:X:X:X::X/<0-128>> {<X:X:X:X::X>, interface vlan <vlan_id>
<FE80::X:X:X >}
ipv6 IPv6 configuration commands
route
Add IP route
<X:X:X:X::X/<0-128>>
I Pv6 prefix x:x::y/z
<X:X:X:X::X>
IPv6 unicast address (except link-local address) of next-hop
interface
Select an interface to configure
vlan
VLAN Interface
<vlan_id>
VLAN identifier(s): VID
<FE80::X:X:X>
IPv6 link-local address of next-hop
Default:
None
Usage Guide:
To configure static route for IPv6
Example 1:
To configure static route as below table for IPv6.