70 show network-clock, 71 show ntp status – Interlogix NS4702-24P-4S-4X Command Line Guide User Manual
Page 397
Advertising
-397-
4.21.70 show network-clock
Command:
show network-clock
show
Show running system information
network-clock
Show selector state
Default:
N/A
Usage Guide:
To display the SyncE information.
Example:
To display the SyncE information.
Switch # show network-clock
Selector State is: Free Run
Alarm State is:
Clk: 1 2
LOCS: FALSE FALSE
SSM: F ALSE F ALSE
WTR: FALSE FALSE
LOL: FALSE
DHOLD: T RUE
SSM State is:
Interface T
x SSM Rx SSM Mode
GigabitEthernet 1/1
QL_NONE QL_LINK Master
4.21.71 show ntp status
Command:
show ntp status
show
Show running system information
ntp
Configure NTP
status
status
Advertising