Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 413)

-413-
4.21.89 show snmp access
Command:
show snmp access [ <group_name> { v1 | v2c | v3 | any } { auth | noauth | priv } ]
show
Show running system information
snmp
Display SNMP configurations
access
access configuration
<GroupName : word32>
group name
any
any security model
v1
v1 security model
v2c
v2c security model
v3
v3 security model
auth
authNoPriv Security Level
noauth
noAuthNoPriv Security Level
priv
authPriv Security Level
Default:
N/A
Usage Guide:
To display the SNMP Access information.
Example:
To display the SNMP Access information
Switch # show snmp access
Group Name : default_ro_group
Security Model : any
Security Level : NoAuth, NoPriv
Read View Name : default_view
Write View Name : <no writeview specified>
Group Name : default_rw_group
Security Model : any
Security Level : NoAuth, NoPriv
Read View Name : default_view
Write View Name : default_view