Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 429)

-429-
at
Ether Type is AppleTalk
ip
Ether Type is IP
ipx
Ether Type is IPX
llc
LLC-based VLAN status
<dsap>
DSAP (Range: 0x00 - 0xFF)
<ssap>
SSAP (Range: 0x00 - 0xFF)
snap
SNAP-based VLAN status
<oui>
SNAP OUI (Range 0x000000 - 0XFFFFFF)
rfc-1042
SNAP OUI is rfc-1042
snap-8021h
SNAP OUI is 8021h
<pid>
PID (Range: 0x0 - 0xFFFF)
Default:
N/A
Usage Guide:
To display the Protocol-based VLAN information.
Example:
To display the Protocol-based VLAN information.
Switch # show vlan protocol
Protocol Type Protocol (Value) Group ID
------------- ------------------ ------ --------
LLC_SNAP OUI-00:e0:2 b; PID:0x1 q
Switch 1
---------
Group ID VID Port s
---------------- ---- -----
q 2 GigabitEthernet 1/1
4.21.108 show voice vlan
Command:
show voice vlan [ oui <oui> | interface ( <port_type> [ <port_list> ] ) ]
show
Show running system information
voice
Voice appliance attributes
vlan
Vlan for voice traffic
interface
Select an interface to configure