Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 197)

-197-
4.2.73.10 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# ip dhcp pool Nsswitch
Switch (config-dhcp-pool)# exit
Switch (config)#
4.2.73.11 hardware-address
Command:
hardware-address <MAC>
hardware-address
Client hardware address
<MAC>
Client MAC address
Default:
None
Usage Guide:
To configure MAC address of DHCP Server while the pool is in the host type.
Example:
To configure MAC address (00:11:22:33:44:55) of DHCP Server for pool “Nsswitch” while the pool is in the host type.
Switch# configure terminal
Switch (config)# ip dhcp pool Nsswitch
Switch (config-dhcp-pool)# hardware-address 00:11:22:33:44:55