Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 187)

-187-
Usage Guide:
To configure Robustness Variable of MLD snooping for specific VLAN
Example:
To configure Robustness Variable (88) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping robustness-variable 88
4.2.66.27 ipv6 mld snooping unsolicited-report-interval
Command:
ipv6 mld snooping unsolicited-report-interval <IpmcUri : 0-31744>
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
robustness-variable
Robustness Variable
<IpmcUri : 0-31744>
0 - 31744 seconds
Default:
1
Usage Guide:
To configure Unsolicited-Report-Interval of MLD snooping for specific VLAN
Example:
To configure Unsolicited-Report-Interval (99 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping unsolicited-report-interval 99
4.2.66.28 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A