Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 244)

-244-
Switch# configure terminal
Switch (config)# mep 1 client domain evc
4.2.127 mep <Instance> client flow
Command:
mep <Instance> client flow <cflow> level <level> [ ais-prio [ <aisprio> | ais-highest ] ]
[ lck-prio [ <lckprio> | lck-highest ] ]
mep Maintenance Entity Point
<Instance>
The MEP instance number.
level
The MEG level on the client layer
<Level : 0-7>
The MEG level value
ais-prio
AIS injection priority
<Aisprio : 0-7>
AIS injection priority value
ais-highest
Request the highest possible AIS priority
lck-prio
LCK injection priority
<Lckprio : 0-7>
LCK injection priority value.
lck-highest
Request the highest possible LCK priority.
Default:
0
Usage Guide:
To configure Client Flow of MEP
Example:
To configure Client Flow of MEP 1 as below table.
Switch# configure terminal
Switch (config)# mep 1 client flow 5 level 4 ais-prio ais-highest lck-prio 3