Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 315)

-315-
Example:
To enable the Restricted Role of CIST
Switch# configure terminal
Switch (config)# snmp-server host Interlogix
Switch (config-snmps-host)# spanning-tree restricted-role
4.2.213.12 spanning-tree restricted-tcn
Command:
spanning-tree restricted-tcn
spanning-tree
Spanning Tree protocol
restricted-tcn
Restrict topology change notifications
Default:
Disabled
Usage Guide:
To enable the Restricted TCN of CIST
Example:
To enable the Restricted TCN of CIST
Switch# configure terminal
(config)# spanning-tree aggregation
(config-stp-aggr)# spanning-tree restricted-tcn
4.2.214 switchport vlan mapping
Command:
switchport vlan mapping <group> <vlan_list> <translation_vlan>
switchport
Set switching mode characteristics
vlan
vlan - Vlan translation
mapping
Add VLAN translation entry into a group
<group id : 1-29>
Group id
<vlan_list>
VLAN list
< translation_vlan >
translation VLAN ID
Default:
None