Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 398)

-398-
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------ ------------------------------------------
1 19 2.168.0.44
2
3
4
5
4.21.72 show platform phy
Command:
show platform phy [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
platform
Platform specific information
phy
PHYs' information
interface
Search by port
Default:
N/A
Usage Guide:
To display the PHY information.
Example:
To display the PHY information for GigabitEthernet 1/1.
Switch # show platform phy interface GigabitEthernet 1/1
Port API Inst W AN/LAN/1G Mode Dupl ex S peed Link
---- -------- - --------- ---- ------ ----- ----
1 Default 1G ANEG - - No