Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 317)

-317-
port
TCP port for TACACS+ server
<Port : 0-65535>
TCP port number
timeout
Time to wait for this TACACS+ server to reply (overrides default)
<Seconds : 1-1000>
Wait time in seconds
<Key : line1-63>
The shared key
Default:
None
Usage Guide:
To configure the Host of TACACS+ Server
Example:
To enable the Host (below table) of TACACS+ Server
Switch# configure terminal
Switch (config)# tacacs-server host Interlogix.com port 55 timeout 6 key 7788
4.2.217 transport email authentication
Command:
transport email authentication username <username> password <password>
transport
Enable or disable transport email function.
email
Enable or disable transport email function.
authentication
configure SMTP authentication's username and password
<Username>
User name allows letters, numbers and underscores
<Password>
The ENCR YPTED (hidde n) user p assword. Notic e th e ENC RYPTED p assword will b e d ecoded by
system internally. You cannot directly use it as same as the Plain Text and it is not human-readable text
normally.
Default:
N/A
Usage Guide:
To configure SMTP authentication's username and password
Example:
To configure SMTP authentication's username ([email protected]) and password (456)
Switch# configure terminal
Switch (config)# transport email authentication username [email protected]
password 456