Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 306)

-306-
4.2.212.5 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (host Interlogix.com 66 informs)
Switch# configure terminal
Switch (config)# snmp-server host Interlogix
Switch (config-snmps-host)# no ip address dhcp
4.2.212.6 informs
Command:
informs retries <retries> timeout <timeout>
informs
Send Inform messages to this host
retries
retires inform messages
<Retries : 0-255>
retires times
timeout
timeout parmater
<Timeout : 0-2147>
timeout interval
Default:
None
Usage Guide:
To configure Trap Inform time of SNMP
Example:
To configure Trap Inform time (below table) of SNMP