Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 313)

-313-
4.2.213.8 spanning-tree link-type
Command:
spanning-tree link-type link-type { point-to-point | shared | auto }
spanning-tree
Spanning Tree protocol
link-type
Port link-type
auto
Auto detect
point-to-point
Forced to point-to-point
shared
Forced to Shared
Default:
Point to Point
Usage Guide:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Example:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host Interlogix
Switch (config-snmps-host)# spanning-tree link-type shared
4.2.213.9 spanning-tree mst <instance> cost
Command:
spanning-tree mst <instance> cost { <cost> | auto }
spanning-tree
Spanning Tree protocol
mst
STP bridge instance
<Instance : 0-7>
instance 0-7 (CIST=0, MST1=1...)
cost
STP Cost of this port
<Cost : 1-200000000>
Cost range
auto
Use auto cost
Default:
Auto
Usage Guide:
To configure the Path Cost of MSTI Port
Example:
To configure the Path Cost (321) of MSTI Port (MST 2)