Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 414)

-414-
4.21.90 show snmp community v3
Command:
show snmp community v3 [ <community> ]
show
Show running system information
snmp
Display SNMP configurations
community
Community
v3
SNMPv3
<Community : word127>
Specify community name
Default:
N/A
Usage Guide:
To display the SNMPv3 Community information.
Example:
To display the SNMPv3 Community information
Switch # show snmp community v3
Community : public
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community : private
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
4.21.91 show snmp host
Command:
show snmp host [ <conf_name> ] [ system ] [ switch ] [ interface ] [ aaa ]
show
Show running system information
snmp
Display SNMP configurations
host
Set SNMP host's configurations
<ConfName : word32>
Name of the host configuration
aaa
AAA event group
interface
Interface event group
switch
Switch event group
system
System event group