Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 148)

-148-
4.2.65.98 qos policer
Command:
qos policer <Rate : 100-13200000>
qos
Quality of Service
policer
Policer configuration
<Rate : 100-13200000>
Policer rate (default kbps)
Default:
0
Usage Guide:
To configure Ingress Port Policers Rate of QoS for specific interface
Example:
To configure Ingress Port Policers Rate (9999 Kbps) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos policer 9999
4.2.65.99 qos queue-policer queue
Command:
qos queue-policer queue <Queue : 0~7>
<Rate : 100-13200000>
qos
Quality of Service
queue-policer
Queue policer configuration
queue
Specify queue
<Queue : 0~7>
Specific queue or range
<Rate : 100-13200000>
Policer rate in kbps
Default:
0
Usage Guide:
To configure Ingress Queue Policers Rate of QoS for specific interface
Example:
To configure Ingress Queue (4) Policers Rate (9999 Kbps) of QoS for GigabitEthernet X/X
Switch# configure terminal